Modifying Your Subaru – A Beginner’s Guide Part 2


From mild, bolt-on mods, through to full blown, high horsepower race builds there are Turbosmart products to suit every Subaru enthusiast.

BOOST CONTROL

The simplest and most cost-effective way of increasing the boost is via a Gated Boost Controller Valve (GBCV). Easy to fit and set, a GBCV offers a simple boost control solution if you’re  after a mild boost increase while running a factory turbo. Once fitted, you simply set your boost and forget it. The boost can be adjusted under the hood (Boost Tee) or from within the cabin (In-Cabin and Dual Stage). Turbosmart offers three types of GBCVs:

 

 

 

Boost Tee
The Boost Tee is an ideal entry-level boost controller. It’s inexpensive and easy to fit. The boost adjustable from under the hood with an accurate, proven Detent System. Set your boost and forget it – it’s that simple!

See the full list of features here.

Suitable for all Subaru WRX, STi, Liberty/Legacy and Forester models.


 

 

 

In-Cabin

With the In-Cabin you can set the boost from the driver’s seat. Using the same proven Detent System as the Boost Tee, In-Cabin allows you to make boost adjustment on the run.

See the full list of features here.

Suitable for all Subaru WRX, STi, Liberty/Legacy and Forester models.

 


 

 

 

Dual Stage Boost Controller

The Dual Stage Boost Controller offers a fast boost response with two adjustable boost levels. It allows you to toggle between high and low boost on the fly via a cabin-mounted switch. Both high and low boost settings are fully adjustable.

See the full list of features here.

Suitable for all Subaru WRX, STi, Liberty/Legacy and Forester models.

 

 


If you want to have more control over your turbocharger than the GBCVs can provide – the next step up are Electronic Boost Controllers. Offering a plethora of useful features like boost-by-gear, overboost shutdown or boost correction, these units really put the boost control at your finger tips. Turbosmart offers two types of electronic boost controllers:

e-Boost STREET

Aimed at the street performance market, the e-Boost Street features many features found on its big brother – the e-Boost2. If you want value-for-money and no nonsense features in your electronic boost controller then e-Boost STREET is the product for you.

See the full list of features here.

Suitable for all Subaru WRX, STi, Liberty/Legacy and Forester models.


e-Boost 2

Turbosmart’s flagship boost management system. If you’re after the best and don’t like compromises this is the one for you. Used and recommended by top level racers around the world the e-Boost2 will let you control, monitor, map and compensate boost, water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM.

It is one of the most sophisticated boost controllers on the market – try it and you will never use any other boost controller!

For a full list of features click here.

Suitable for all Subaru WRX, STi, Liberty/Legacy and Forester models.

 

 Coming next: Blow-Off and Bypass Valves.


Leave a Reply

Your email address will not be published. Required fields are marked *

Connect with Facebook